The right-angle form means the sensing tip runs perpendicular to the connection head, so the assembly can be mounted through the furnace wall or ladle side and read from a position clear of the heat and the metal splash. With a suitable protection tube it can stay in the melt for 24-hour continuous measurement.
1. 24-hour continuous temperature measurement through a special thermocouple protection tube, rather than periodic dipping.
2. Iron-based alloy or Si₃N₄-bonded SiC protection tube, which is what survives contact with molten aluminum.
3. High strength and strong corrosion resistance against aluminum attack.
4. Short thermal response time, so the reading follows the melt rather than lagging it.
5. Long service life in continuous immersion service.
6. Flange fixing, with flange size made to your furnace penetration.
Immersed in the bath of a fixed aluminum melting and holding furnace, in the refining vessel of a refining tank, or in the metal stream of a launder system. Temperature control at these three points is what decides whether the metal arrives at the hot top billet casting machine within specification.
A K-type thermocouple is a pair of dissimilar conductors — nickel-chromium and nickel-aluminum-silicon (chromel–alumel) — joined at the measuring end. When the junction is at a different temperature from the reference end, a small voltage proportional to the temperature difference is generated. Measure that voltage against a known reference and you have the junction temperature. The right-angle assembly simply carries that junction out on a leg so the tip sits in the metal while the head stays outside the furnace.
Molten aluminum is aggressive in a way that is not obvious until you have lost a sensor to it. aluminum atoms are small and highly mobile, so liquid aluminum is very corrosive towards metals, and the oxide film interlayer holds a large number of hydrogen atoms which attack solid metal surfaces. A bare thermocouple does not survive that. An armoured thermocouple with an iron-based alloy or Si₃N₄-bonded SiC protection tube does, and it is the tube — not the sensing element — that sets the service life.
In smelting and holding of aluminum and aluminum alloys, melt temperature is the main factor controlling product quality. Holding the melt at the right temperature avoids the oxidation caused by over-heating, and it avoids the power wasted by running hotter than necessary. For casting, aluminum is typically held at about 720 °C, and the thermocouple is what keeps it there.
| Feature | Specification |
|---|---|
| Product name | Thermocouple |
| Material | NiCr-NiSi |
| Model | WRN-531 |
| Graduation number | K (N / E / J / T / PT100 available on request) |
| Protection tube diameter | 16 mm (other diameters on request) |
| Length | 400 mm × 3500 mm (other lengths on request) |
| Wire diameter | 1.5 mm (other diameters on request) |
| Temperature measurement range | 0–1300 °C |
| Fixing method | Fixed flange, flange size customised |
| Continuous measurement | 24-hour continuous measurement with the correct protection tube |
The protection tube is made of stainless steel by default. For long-term measurement above 800 degrees, it is recommended that the protection tube can be customized with 2520 material, GH3030 and GH3039 material, and anti-corrosion can be customized with 316L material. It is recommended to use 2.0mm or 2.5mm for even wire diameter above 800℃. A single-layer protection tube suits flue-gas temperature measurement, while a silicon-carbide (SiC) tube is used for molten-metal temperature measurement.
The thermocouple is used in temperature measurement across the aluminum processing and aluminum electrolysis industries, anywhere melt temperature has to be known continuously rather than guessed.
1. aluminum melting and holding furnaces — see fixed aluminum melting and holding furnace.
2. Refining and degassing vessels — see refining tank.
3. Molten metal in a launder system ahead of casting.
4. aluminum electrolysis cells.
5. Metallurgy, chemical industry and non-ferrous smelting generally.
6. Molten copper temperature measurement, where the SiC tube is equally suitable.