The distributing launder is produced by vacuum casting with flexible molds, giving a smooth, dense surface, good erosion resistance and excellent thermal insulation at an outstanding performance-to-cost ratio. Common sizes cover billets from 3 inches to 20 inches, and other sizes are made to order. The material is aluminum silicate fiber and ceramic composite.
1. High strength, so it holds shape on the mold table under repeated heating.
2. Resists etching by liquid aluminum — long-term use without drossing, so the channel does not build up and change the flow split.
3. Long service life, which matters because changing a distribution launder stops the cast.
4. Good insulation, so metal arrives at each mold at the same temperature.
5. Sizes from 3 to 20 inches as standard; other sizes to order.
Metal arrives from the main launder and enters the distribution launder, which splits it into several outlets — one per mold. The design aims for equal flow and equal temperature at every outlet, so each billet in the cast starts from the same conditions.
Equal distribution depends on the channel staying clean and its geometry staying constant. If the lining is etched by the aluminum or builds up dross, one outlet flows more than another and billets differ in level and temperature. That is why resistance to etching and freedom from drossing are the properties that matter here, not just refractoriness.
Nothing should change — the metal is only being divided. A well-performing distribution launder delivers the same metal, at the same temperature, to every mold. Variation at this point shows up as billet-to-billet differences in the cast.
| Physicochemical Indexes | Value |
|---|---|
| Density | 135–145 kg/m³ |
| Flexural strength | > 6 MPa |
| SiO₂ | 60% |
| Al₂O₃ | 15% |
| CaO | 15% |
| Feature | Specification |
|---|---|
| Material | aluminum silicate fiber and ceramic composite |
| Application | Casting mold table, especially hot top casting of aluminum and aluminum alloy |
| Standard sizes | Billet 3", 4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", 20" |
| Custom sizes | Produced to customer requirements |
| Long-term use temperature | 1100°C |
| Classification use temperature | 1650°C |
| Service life | 200 or more casting times, or more than 1 year |
| Thermal conductivity (W/(m·K)) | <1 |
| Chemical composition | SiO₂ 60%; Al₂O₃ 15%; CaO 15% |
1. Hot top casting of aluminum and aluminum alloy billet.
2. Distribution on billet casting mold tables.
3. aluminum billet plants casting several billets per cast.
4. Replacement distribution launders for existing casting platforms.