Mounted at the head of the casting pit of a hot top billet casting machine or an alloy ingot casting system line, driving the lifter rack that draws the billet downward. The published models are the JK series fast electric winch, supplied in three ratings. Selection is by rope pull required and by the rope speed your casting process needs.
1. Compact and light for the load it handles — the largest model in the range weighs 400 kg.
2. Steel rope drive gives smooth, stepless lifting with no gearbox step changes during the cast.
3. Three ratings from 3 kW to 7.5 kW, so the winch can be matched to table load rather than oversized.
4. Rope speeds of 22–30 m/min covering the range needed for billet casting.
5. Simple, proven construction: motor, reducer, drum and rope. Maintenance is routine.
An electric motor drives a reducer, which turns the rope drum. The steel rope runs from the drum to the casting table. As the drum winds in, the table is drawn down and the billet is pulled out of the mold at a controlled rate; the rope speed is the casting speed.
Speed reduction is the whole point. The reducer ratios in this range run from 33:1 to 52:1 with input shaft speed at 1450 r/min, bringing output down to rope speeds of 22–30 m/min. That reduction is what allows a small motor to hold a heavy table steady, and why rope speed stays constant as the load changes through the cast.
The winch does not touch the metal, but it governs the cast. Steady rope speed means steady withdrawal, which means a stable meniscus in the mold. Variation in rope speed shows up directly as surface laps on the billet.
| Feature | JK0.5 | JK1.0 | JK2.0 |
|---|---|---|---|
| Reducer centre distance (mm) | 300 | 350 | 400 |
| Speed ratio | 33:1 | 50:1 | 52:1 |
| Rope speed (m/min) | 30 | 22 | 22 |
| Input shaft speed (r/min) | 1450 | 1450 | 1450 |
| Auxiliary power (kW) | 3 | 4 | 7.5 |
| Wire rope diameter (mm) | Ø7.7 | Ø9.3 | Ø11 |
| Rope length (m) | 80 | 100 | 80 |
| Weight (kg) | 190 | 300 | 400 |
| Dimensions (mm) | 765 × 624 × 340 | 850 × 809 × 400 | 1200 × 850 × 520 |
If you are unsure, send us the table load and the rope speed your casting process requires and we will confirm the rating. Rope length can be specified separately — 80 m and 100 m are standard.
1. Lifting and lowering the casting table on aluminum billet casting lines.
2. aluminum billet plants running hot top, air slipper or oil slipper casting.
3. Replacement or upgrade of the winch on an existing casting machine.
4. General lifting duty in aluminum casting plants where a compact electric winch is needed.
5. Works with the hot top billet casting machine casting table and lifter rack, and with the crystallizer and mold assembly it drives.