OEM Customized Ingot Melting Furnace - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu

Product Detail

Product Tags

Feedback (2)

We are professional supplier from China, with specialized experience in aluminum industry for many years. Aluminium Melting, Air Compressor, Aluminum Ingot Stacker, The refiner slagging agent is used in the scrap aluminum capacity process to remove the gas and slag in the aluminum liquid, and then add the corresponding metal required by the aluminum alloy, such as silicon metal 553, 441, 3303, etc., 99.9% magnesium ingot, 5Ti1B aluminum titanium boron wire. Other additives are analyzed according to the molten aluminum test before deciding whether to add

OEM Customized Ingot Melting Furnace - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu Detail:

1.Select the hot-top casting equipment platform installation accessories of the corresponding specifications;

2.install the distribution plate, sleeve, adapter plate, distribution groove, and high-purity graphite ring on the upper side of the platform, and install the sleeve, adapter plate, and graphite ring on the mold.
On the inside, ensure clean, no damage and no gaps. It is best to use ceramic fiber paper or ceramic fiber blanket to seal the sides and bottom, which is helpful for thermal insulation.

3.After the overall hot top casting platform is installed, evenly preheat the installed standard equipment platform to 260-350 ℃, by electricity or gas. No open flame should contact the lining body of the product, Otherwise, the crack damage that occurs shall be borne by the user.

4.remove adsorbed crystal water, Make it safe and efficient use

Product detail pictures:

Related Product Guide:

Foshan Zhelu Trading Co., Ltd. is a one-stop service company engaged in aluminum casting, extrusion,powder coating and anodizing production lines, saving time and effort for customers. OEM Customized Ingot Melting Furnace - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu , The product will supply to all over the world, such as: Paraguay, Slovakia, Luxembourg, Under the action of pressure, the heated aluminum rod is divided into several metal flows, enters the welding chamber through the shunt hole, collects in the welding chamber, and is welded again in the environment of high temperature, high pressure and high vacuum, and finally flows out through the gap between the mold core and the die hole, so as to form a pipe or hollow aluminum profile that meets the size and performance requirements, as an aluminum door and window profile or industrial aluminum profile. If bending is required, a bending tool is added to the rear device.

Anodizing Dye Supplier