Manufactur standard Extrusion Pullers - filter box with ceramic filter board filtering molten aluminum – ZheLu

Product Detail

Product Tags

Feedback (2)

Our complete line solutions include: aluminum alloy ingot/Billet production line and aluminum extrusion production line. Extrusion Mould, Vertical Powder Coating Line, Alodine Treated Aluminum, Aluminum casting process: The recycled aluminum scrap is to be heated and melted in an aluminum melting furnace,add with pure aluminum ingot, with refining flux and dross flux, the impurities will be removed, Then silicon and magnesium will be put into molten aluminum ,After flowing into launder and filter box,the molten aluminum finally reach the ingot casting line, with stacking robot, aluminum ingot will be stacked and packaging. While aluminium billet is another casting equipment, molten aluminum flows into Hot top casting plate, after cooling and Lifting and lowering of pallets, the billet will be made under the plate, then aluminum billet is hoisted out by the crane and enters the homogenization furnace, finally cut by saw.

Manufactur standard Extrusion Pullers - filter box with ceramic filter board filtering molten aluminum – ZheLu Detail:

1. It can be used directly at room temperature without worrying about thermal shock.
2. No thermal expansion and low thermal conductivity.
3. It can float in aluminum, reducing the possibility of refractory inclusions.

Product detail pictures:

Related Product Guide:

Aluminum extrusion press machine We can supply equipment from 600UST-12000UST tonnage, as well as all rear equipment to match it. Manufactur standard Extrusion Pullers - filter box with ceramic filter board filtering molten aluminum – ZheLu , The product will supply to all over the world, such as: Belarus, Marseille, Leicester, Under the action of pressure, the heated aluminum rod is divided into several metal flows, enters the welding chamber through the shunt hole, collects in the welding chamber, and is welded again in the environment of high temperature, high pressure and high vacuum, and finally flows out through the gap between the mold core and the die hole, so as to form a pipe or hollow aluminum profile that meets the size and performance requirements, as an aluminum door and window profile or industrial aluminum profile. If bending is required, a bending tool is added to the rear device.

Billet In Manufacturing